Author: danny smith

Find Quality Equipment for Drill Sites Online

Safety clamps are important equipment that is always used during the process of oil drilling and well servicing. The equipment is primarily used as a backup safety mechanism against drill pipe slippage for slips and other gripping devices. It also provides additional control in the case of component failure. There are several types of safety clamps, including Safety clamp type MP, which is used in several positions to provide safe service. Safety clamps are designed in such a manner that the serrated teeth inside the slips will grip the pipe and stabilize and suspend the drill string in the rotary table. However, if the slips don’t have sufficient grip, the pipe could slip and cause major damage, which is why safety clamps were created.

Further, safety clamps are used in conjunction with slips as an extra precaution against costly damaged and lost production time. Safety clamps are manmade using individual, tapered links that are hinged for elasticity. Depending on the type of safety clamp, individual sections can be added or removed to accommodate different-sized pipes, making them a flexible solution for a variety of drill sites. Thus, when it comes to buying Safety clamp type MP, always prefer high-quality equipment that will always offer you the best protection service for drill sites.

In order to buy the best quality of type MP safety clamp always prefer a reputable online store. At a reliable online store not only find the best deal but also find a wide variety of selections while sitting at your home. In that case, if you are looking for a reliable online store, visit m-o-t .com. Here, you will not only find Safety clamps but also find other equipment like power tongs, joint elevators, and many more. Thus, to get the tubing power tongs and safety clamps for your various drill sites, always prefer our online store.


What Are the Features and Benefits of Torque-Turn Systems?

Torque-Turn can be used about casing and hoses in the further, higher-pressure gas water wells where connection ethics and leak opposition are most essential. By monitoring the make-up of cable connections with both rpm typically and turns at the same time, optimum bearing strain is achieved involving the connection. The stage of bearing strain directly impacts the leak resistance regarding the connection. Typically, the torque-turn system allows the maximum bearing pressure to achieve without forever deforming the tube material.

The torque turn system can be used at any time. Precise control above clamping force is usually required. It has a first torque and a great additional turn. The original torque is necessary to bring all joint parts directly into contact. The additional switch provides the wanted clamping force. Make certain that all fasteners are torqued before an individual performs the added turns. Turn the fastener typically based on the particular amount. The necessary amount will typically equal to or greater as compared to 90°. The necessary amount will typically be in 30° increments. Turns regarding 120° or 180° are preferred. Transforms of 120° or perhaps 180° are quickly measured with the details of the hex head of typically the fastener.

The usage of the torque-turn approach allows the next;

• Raise the lifestyle of the securer.

• Maximize the clamping force of any fastener.

• Lowest friction involving the bolt and part.

Torque-Turn applies to fasteners that want to be turned to a pair angle after the initial torque is usually applied.

1. Rpm is the fastener to be able to the initial rpm.

2. Mark a new line within the securer and typically the abutment.

3. Indicate another line within a different color on the required angle within the abutment.

4. Switch the fastener for the appropriate torque viewpoint.

5. Verify the mark typically on the fastener is in line with all the torque viewpoint marks.


Observing it and aiming the mark about the socket together with the original starting up mark can guide in turning typically the fastener to typically the correct angle. To get more products like Single Joint Elevatorsdrilling elevators, and torque turn systems, you must visit MOT.

Tubing Power Tongs in Oil Industry

If you are in the oil industry, you know that tubing power tongs are an essential tool. Tubing power tongs are devices that are used to grip and turn tubing. They are an essential tool in the oil industry because they allow workers to safely and efficiently connect or disconnect sections of pipe. There are many different types of power tongs, each designed for a specific type of tubing. The most common types of power tongs are those that grip the outside of the tubing (external gripping) and those that grip the inside of the tubing (internal gripping).

External gripping power tongs are typically used on smaller diameter tubing, while internal gripping power tongs are better suited for larger diameter tubing. Power tongs can be operated manually or automated, depending on the needs of the application. Automated power tongs offer increased safety and efficiency, and are typically used in applications where high torques are required.

Key Functions of Power Tongs

In the oil industry, tubing power tongs are used for various purposes. They can be used to install or remove the tubing from wells and tighten or loosen fittings on pipelines. Tubing power tongs are also used to repair damaged tubing and pipeline components. Additionally, you can use them to test the strength of welded seams on pipelines.

Tubing power tongs are essential for any company that works with oil pipelines. They provide a safe and efficient way to perform various tasks related to pipeline maintenance and repair. Tubing power tongs are available in various sizes and configurations, so it is important to choose the right tool for the job. With proper care and maintenance, tubing power tongs can provide many years of reliable service.

Safety Clamp Type MP is used in tubing power tongs to provide a safe and secure grip on the tubing being worked on. It is also useful in preventing accidental release of the tubing during operations. The safety clamp is easy to install and remove, and it is possible to reuse it many times. It is an essential part of any tubing power tong kit. Thanks for choosing Safety Clamp Type MP!

Oilfield Equipment – How Operators Can Save Millions

Oil operators spend billions of dollars each year on oilfield equipment and its parts. Some of the product purchases consist of a casing, tubing, oil rig, dies and inserts, power tongs, and many more. There are hundreds of companies that sell equipment and parts. Just Google the word and view all the listings, in addition to all the published info out there. To further understand the buying process, here are some of the questions I would like to answer. Where do most companies buy their products? How can they save cash like any other business?

Let’s start with the question that where companies buy their products from. Most oil operator companies purchase the equipment from a reputable online store. At, a reputable online store, you will always find a huge selection of oilfield equipment that is not easily available in a local dealer. When it comes to buying dies and inserts online, you will easily find different choices while sitting at home. You can simply find the best equipment that will definitely fit your machinery. Apart from that, you will also get fast and the best delivery services when it comes to buying this equipment online.

Further, when you place an order online, you will not only get a wide range of selection and quick delivery services but also find the best price deals compared to local stores. Many times, you will find different types of discounts and sales options in a reputable online store. So, one can easily save a huge amount of money while buying these heavy oilfield machinery. There are many online stores offering different types of discount options thus before placing your order must check the reputation of companies by reading customer reviews. However, if you are looking to buy Demco Gate Valves and other parts of oilfield equipment at affordable prices, always visit our online store.

All You Need To Know About Tongs With Hydraulic Power And Bucking Units!

The Hydraulic power tongs are the tubing Tongs designed to run tubular to extract gas and oil from reservoirs. It provides reliable performance even at the higher torque to break premium connections. Its uses lay down in the land and offshore drilling rigs and well servicing.

MOT manufactures Hydraulic Power Tongs following API 7K and 8A standards. Further, it also follows the ISO-9001 quality procedures.

MOT’s Hydraulic Power Tongs are used to

Run or pull tubular strings to extract oil and gas from wells during well repair, workover, snubbing, and casing operations.

MOT workover/snubbing –

These lightweight Tongs are the power tongs that have a bi-directional jaw system. They are hydraulic motors with increased torque and dependability.

Specifications –

It consists of two or three spool directional control valves for more efficient hydraulic operations.

It has modified structures for increased strength and durability.

It can quickly adapt to specific job requirements.

MOT casing power tongs –

These are the casing power tongs listing you of a variety of models.

Specifications –

The Tongs are available in pipe sizes ranging from 5-1/2″ to 20″.

Tongs can handle both API Standard and PREMIUM (Proprietary Steel Grade) casing connections, which require more torque.

The following models are available with hydraulic back-up tongs as options: “KMA”, “KHT”, “TQ”, “KJD”, “KD”, and SE 16-25, with torques ranging from 15,000 ft-lbs to 55,000 ft-lbs.

MOT drill pipe power tongs –

Our product “ZQ” series hydraulic power drill pipe tongs are famous in oil and gas drilling. The tongs design is to fulfill the criteria of quick and safe assembly and disassembly of drill pipes and drill collars. You can deploy them on both the land and the sea worldwide. The System consists of an integrated torque tong and bucking Tong, which eliminates the need for manual tongs and spinning chains. Moreover, it can handle pipe with drill collars ranging from 2-3/8″ to 8″ and provide torques of up to 92,000 Lbs-ft.

Bucking units :

Hydraulic Stroking Machines accurately set up and break out threaded connections on the horizontal plane. These assemble and disassemble tubular items.

Threading and repair shops, pipe yards, and completions use the equipment for routine applications and connection problems.

Bucking Unit meets the industry’s ever-changing needs for more precise data, lower costs, and faster turnaround times.

  • As is customary, torque capability is limited to 100 ft-lb
  • An automated self-leveling tool supports support Self-leveling jack.
  • Load cells provide dependable data gathering.

Bucking units’ properties:

1.) Controlling the torque speed

Two positions are using a high-efficiency hydraulic vane motor: high and low.

2.) The Radial Eliminator

Reduces radial load on the joint, which causes torque loss and axial twist, leading to cross-threading damage.

3.) Optional Bi-Directional Compression Load Cell System:

The operator can monitor torque in both directions thanks to two load cells.

4.) Capacity for two sizes The backup mechanism on the 9-5/8 model and bigger includes a dual jaw position, allowing the backup to bite the casing and the connection with the same jaws.

Discover The Tubing Power Tongs Online

Tubing power tongs are the outcome of the oil examination, exhausting, and investigation that is coordinated in the oil field and treatment office. Consequences of oil fields are also arranged on the central area rack. Oilfield uses things that are used for various purposes and one of the huge ones among them is the entering device that is toward the ocean stage that is actually a tremendous plan which houses equipment and workers who are required for isolating oil. Things like these are used for making the fluids and directing them inland. The endlessly oil infiltrating industry assists with perceiving the land supplies for the extraction of oil and combustible gas.

Tubing power tongs like the entering contraption effectively drill openings on the ground. Oilfield Products like mechanical assemblies are massive developments that house water, oil, or oil gas wells. Things and mechanical assemblies can be pretty much nothing and smaller for mineral examinations, water wells, and normal tests. Oilfield items are used for different various vocations. Whenever an oil well has been depleted in the site, the mechanical assembly is all things considered moved off the well close by an assistance rig. Things like the last are made for completing work, for finishing it.

Safety power tongs are pieces of serrated steel presented in the devices that grip the contraption joint of the drill pipe when the utensils are snared onto the line. Tong bites the dust are made of compound steel, and their set surfaces go against wear. The internal flexible focus restricts the stagger of impact and power.

The clear arrangement slices to help and update times, and the pressure-driven shifter part allows the manager to “switch gears on the fly,” discarding the need to stop the tong to switch gears. The little size of the tong makes it an optimal gadget for blaming and workover rig applications. The tubing power utensils are open in high-power and low-force versions and with a collection of decisions. Safety power tongs are used for oilfield infiltrating exercises and for the most part, applied in making up and breaking out of drill pipes. Drill pipe power utensils are expected to be open-throat with high compactness to escape from the drill pipes uninhibitedly.

● Tubing power utensils used for running cylindrical to eliminate oil and gas from stores are intensely arranged and give strong execution even at the more powerful that is expected to break premium affiliations.
● These are used to reduce the drill time and lower costs. They are expected for safeguarded and expedient make-up and break-out drill lines and drill collars.
● These are joined with a two-speed unbelievable train that ensures steady quality and immaterial help close by energetic director end up.

What Are Torque Turn Systems And Their Benefits?

Torque turn systems are an optional module for the Jim 20 which is compiled in an easily readable report for the operator to evaluate. The torque turn system offers full torque and turns to monitor and store. The data includes necessary acceptance criteria and is presented in a torque turn report. So the operator can easily verify or reject the completed connections.

The main features of torque turn systems are:

  • Torque turn computer interfacing JiM 20 PLC
  • High-speed monitoring of torque-and-turn data
  • Automatic starting and stopping of monitoring Pipe profile database
  • Benefits of Torque turn system
  • Help in real-time monitoring of the torque
  • They have maximum and minimum shoulder limits for various casing
  • Measurement and display of shoulder slope
  • Win report program

Sucker rod power tongs

Sucker rod power tong is used for quick make-up and break out in well service operations. The structure of the tong is compact, concise, and light. With the help of a low-speed large torque hydraulic motor master tong is driven which matches with manual control valve.

The features of tong are

  • Clamp the sucker rod use corresponding jaw set
  • To master the tong according to customers request dies may be equipped
  • The torque control valve may be equipped with the customer’s request
  • Power tong is provided for drill pipe, tubing, casing, and sucker rod
  • They have a high degree of mechanization and larger torque
  • With hydraulic lifting equipment
  • Performs safety, labor-saving, and high-efficiency

How to use sucker rod power tongs

The company designs and manufactures oil production wellhead devices and hydraulic power tongs. Drilling equipment and supporting products such as hydraulic rotator, sucker rod hook, automatic torque control system.

Importance Of Equipment Maintenance In Oil And Gas Industries

When it comes to oil well servicing and drilling processes, oil companies always use different types of heavy equipment and tools like hydraulic power tongs, casing elevators, and many more that will offer them easy and hassle-free services. But in a long run, these tools contain rust and corrosion thus repair and maintenance are essential to mitigate corrosion and increase safety and reliability as well as reduce expenses for the long term.

Oilfield tools maintenance services are the actions of preparing, conserving, and restoring tools before, during, and oilfield creation. Each phase is wisely handled to preserve the equipment, structures, and nearby areas to fully treatable safe situations. Guiding oilfield tools maintenance enables the anticipation of property loss/damage and the essential tools to protect all employees offshore.

When it comes to equipment maintenance like bucking units, extending operation beyond design life presents safety risks (including injuries), business risks, and operational challenges. These risks disturb significant business decisions and need to be counted and managed as companies struggle for continuous operations of aging equipment assets. Aging tools may present increased challenges in maintaining equipment honesty, and therefore, will have to be achieved accordingly.

Equipment renovation and maintenance are vital in order to keep plans running simply, reliable and trustworthy. Preventative tools repairs are the key to spreading equipment life and eventually saving you time and cash. While the common insight may be that preventative maintenance is needless, the reality is that without it, users are often left with more costly repairs. The more often assets are checked, the less likely hazardous problems like offshore fires happen. Businesses that follow preventive maintenance agendas reduce the risk of surprising breakdowns, health dangers and injuries, and liability claims.

Are you looking to buy the best quality hydraulic power tongs at the best price deal? Visit our online store.

Interesting Facts You Need To Know About Sucker Rod Power Tongs

Sucker rod power tongs, commonly known as “beam pumping,” uses mechanical energy to move oil from the bottom of a well to the top. sucker rod power tongs may be used to pump a well at external bottom-hole pressure to maximize oil production rates, and it is efficient, simple, and straightforward to use for field personnel. Tiny holes, multiple completions, and high-temperature and viscous oils are all candidates. Improved pump-off controllers, better gas separation, gas handling pumps, and optimization employing surface and bottom-hole cards are the latest beam pumping trends.

Sucker Rod Tong 5/8” – 1-1/8” / XQ29/2.6

Power tongs are enormous pneumatic or hydraulically operated rig tongs used to turn drill pipe, casing, tubing, or another pipe when it is made up or broken out. Making up connections is one of the most significant functions of the rig tong. It would help if you considered how to get the proper torque value to the junction with the rig tong while thinking about efficiently doing this.


How torque turn systems are applied

An object’s ability to rotate around an axis is measured in terms of torque. It is a vector quantity, and torque is an example. The axis forces determine the vector direction of the torque. Using torque to turn determines how much torque is needed to spin one component around another. Torque (shear) strength is measured in terms of breakaway torque and running torque. Breakaway or beginning force can be crucial in the case of OK bearings, for example, if running torque is extremely low. Keeping one item revolving against another necessitates a certain amount of running torque. Measurement of resistance in a system can be done by a long-term effort such as this. But when measured in detail, it can indicate smoothness or run, a lack of concentricity, or faults that result in the noticeable “chattering.”

Getting Best Quality Bucking Units For Reducing The Time Span For Drilling

In the times when automation has become an important thing and this will also save time, dealing with the right products and tools will enhance the efficacy of the process. Thus, when it comes to oil fields and oil drilling industry there will be a need to get bucking units.There has to be proper automated systems that will have right controls and perhaps that will give the relevant solutions.


Check the connections before the process begins
When you are using such applications you will have to be open to checking the systems and how there should be perfect breakout. There will be need for bottom line assemblies and for that the options need to be cleared well. There will be perfect solutions so that flooring will be rigged soon.
There should be determination of oil fields and perhaps that will bring in the success ratio to make the relevant choices. Checking out the processes will help in enhancing the usability of the oil fields. If the company is equipped with hydraulic power tongs then it would mean that there can be better potentials for the future.

Tubing Ton 2-3/8” – 4-1/2” / XQ114/6B

Planning what would be the relevance of oil field productivity
The oil field productivity will depend upon the basic options and that should give you the basic amenities. So, for every oil field company there has to be proper equipment and tools to make the right choices. Planning every little detail will give the basic example to make the proper plan. The success ratio along with the need to fulfil the demand factor will give the right choice. Just check out what options work well for you and then based on that you can make the choices in the line and perhaps that can help in determining the options.